The slope-intercept is the most “popular” form of a straight line. Many students find this useful because of its simplicity. One can easily describe the characteristics of the straight line even without seeing its graph because the **slope** and [latex]y[/latex]**-intercept** can easily be identified or read off from this form.

## Slope-Intercept Form of the Equation of a Line

The linear equation written in the form

[latex]\large{y = mx + b}[/latex]

is in slope-intercept formwhere:

[latex]m[/latex] is the **slope**, and [latex]b[/latex] is the [latex]y[/latex]**-intercept**

**Quick notes**:

- The slope [latex]m[/latex] measures how steep the line is with respect to the horizontal. Given two points [latex]\left( {{x_1},{y_1}} \right)[/latex] and [latex]\left( {{x_2},{y_2}} \right)[/latex] found in the line, the slope is computed as

- The [latex]y[/latex]-intercept [latex]b[/latex] is the point where the line crosses the [latex]y[/latex]-axis. Notice that in the graph below, the
**red dot**is always found on the main vertical axis of the Cartesian plane. That is the basic characteristic of the [latex]y[/latex]-intercept.

Let’s go over some examples of how to write the equation of a straight line in linear form [latex]y = mx + b[/latex].

### Examples of Applying the Concept of Slope-Intercept Form of a Line

**Example 1**: Write the equation of the line in slope-intercept form with a **slope of**[latex] – \,5[/latex] and a [latex]y[/latex]**-intercept of **[latex]3[/latex].

The needed information to write the equation of the line in the form [latex]y = mx + b[/latex] are clearly given in the problem since

[latex]m = – \,5[/latex] (slope)

[latex]b = 3[/latex] ([latex]y[/latex]-intercept)

Substituting in [latex]y = mx + b[/latex], we obtain

By having a negative slope, the line is decreasing/falling fromleft to right, and passing through the [latex]y[/latex]-axis at point [latex]\left( {0,3} \right)[/latex].

**Example 2**: Write the equation of the line in slope-intercept form with a **slope of **[latex]7[/latex] and a [latex]y[/latex]**-intercept of**[latex] – \,4[/latex].

The slope is given as [latex]m = 7[/latex] and the [latex]y[/latex]-intercept as [latex]b = – \,4[/latex]. Substituting into the slope-intercept formula [latex]y = mx + b[/latex], we have

The slope is positivethus the line is increasing or rising from left to right, but passing through the [latex]y[/latex]-axis at point [latex]\left( {0, – \,4} \right)[/latex].

**Example 3**: Write the equation of the line in slope-intercept with a **slope of **[latex]9[/latex] and passing through the **point** [latex]\left( {0, – \,2} \right)[/latex].

This problem is slightly different from the previous two examplesbecause the [latex]y[/latex]-intercept [latex]b[/latex] is not given to us upfront. So our next goal is to somehow figure out the value of [latex]b[/latex] first.

However, if we examine the slope-intercept form, it shouldlead us to believe that we have enough information to solve for [latex]b[/latex].How?

That means [latex]m = 9[/latex], and from the given point [latex]\left( {0, – \,2} \right)[/latex] we have [latex]x = 0[/latex] and [latex]y = – \,2[/latex].Let’s substitute these known values into the slope-intercept formula and solve for the missing value of [latex]b[/latex].

Now it is possible to write the slope-intercept form as

**Example 4**: Find the slope-intercept form of the line with a **slope of**[latex] – \,3[/latex] and passing through the **point** [latex]\left( { – 1,\,15} \right)[/latex].

Again, the value of [latex]y[/latex]-intercept [latex]b[/latex] is not directly provided to us. But we can utilize the given slope and a point to find it.

Substitute the known values into the slope-intercept formula, and then solve for the unknown value of [latex]b[/latex].

Back substitute the value of the slope and the solved value of the [latex]y[/latex]-intercept into [latex]y = mx + b[/latex].

**Example 5**: A line with the **slope of**[latex] – \,8[/latex] and passing through the **point** [latex]\left( { – \,4,\, – 1} \right)[/latex].

The given slope is [latex]m = – \,8[/latex] and from the given point [latex]\left( { – \,4,\, – 1} \right)[/latex], we have [latex]x = – \,4[/latex] and [latex]y = – \,1[/latex].Now, we are going to substitute the known values into the slope-intercept form of the lineto solve for [latex]b[/latex].

Since [latex]m = – \,8[/latex] and [latex]b = – \,33[/latex],the slope-intercept form of the line becomes

**Example 6**: Write the slope-intercept form of the line with a **slope of**[latex]{3 \over 5}[/latex] and through the **point** [latex]\left( {5,\, – 2} \right)[/latex].

We have a slope here that is notan integer, i.e. the denominator is other than positive or negative one,[latex] \pm 1[/latex]. In other words, we have a“true” fractional slope.

The procedure for solving this problem is very similar to examples #3, #4, and #5.But the main point of this example is to emphasize the algebraicsteps required on how to solve a linear equation involving fractions.

The known values ofthe problemare

- Given
**slope:**

- Given
**point:**

Plug thevalues into [latex]y = mx + b[/latex] and solve for [latex]b[/latex].

As you can see the common factors of [latex]5[/latex] in the numerator and denominator nicely cancel each other out which greatly simplifies the process of solving for [latex]b[/latex]*.*

Putting this togetherin the form [latex]y = mx + b[/latex]

**Example 7**: **Slope of**[latex]{{\, – 3} \over 2}[/latex] and through the **point** [latex]\left( { – 1,\, – 1} \right)[/latex].

The given slope is [latex]m = {{\, – 3} \over 2}[/latex] and from the given point[latex]\left( { – 1,\, – 1} \right)[/latex],the values of [latex]x[/latex] and [latex]y[/latex] can easily be identified.

Now plug in the known values into the slope-intercept form [latex]y = mx + b[/latex] to solve for [latex]b[/latex].

Make sure that when you add or subtract fractions, you generate a common denominator.

After getting the value of [latex]b[/latex],we can now write the slope-intercept form of the line.

**Example 8**: **Slope of**[latex] – \,6[/latex] and through the **point** [latex]\left( {{1 \over 2},{1 \over 3}} \right)[/latex].

The slope is given as [latex]m = – \,6[/latex] and from the point, we have [latex]x = {1 \over 2}[/latex] and [latex]y = {1 \over 3}[/latex].

Substitute the known values into [latex]y = mx + b[/latex]. Then solve the missing value of [latex]b[/latex]*.*

Therefore, the slope-intercept form of the line is

**Example 9**: **Slope of**[latex]{{\,7} \over 3}[/latex] andthrough the **point**[latex]\left( {{{ – \,2} \over 5},{5 \over 2}} \right)[/latex].

Identifying the known values

- Given
**slope:**

- Given
**point:**

The setup to find [latex]b[/latex] becomes

That makes the slope-intercept form of the line as

**Example 10**: A line passing through the given two points [latex]\left( {4,\,5} \right)[/latex] and [latex]\left( {0,\,3} \right)[/latex].

In this problem, we are **not provided** with both the slope [latex]m[/latex] and [latex]y[/latex]-intercept [latex]b[/latex].However, weshould realize that the slope is easily calculated when two points are known using the Slope Formula.

**Slope Formula**

The slope, [latex]m[/latex], of a line passing through two arbitrary points [latex]\left( {{x_1},{y_1}} \right)[/latex] and [latex]\left( {{x_2},{y_2}} \right)[/latex] is calculated as follows…

If we let [latex]\left( {4,\,5} \right)[/latex] be the first point, then [latex]\left( {0,\,3} \right)[/latex] must be the second.

Labeling the components of each point should help in identifying the correct values that would be substituted into the slope formula.

Based on the labeling above, now we know that

Next, write the slope formula, plug in the known valuesand simplify.

Great! We found the slope to be [latex]m = {{\,1} \over 2}\,[/latex].The only missing piece of the puzzle is to determine the [latex]y[/latex]-intercept. Use theslope that we found, together with **ANY** of the two given points. In this exercise, I will show you that we should arrive at the same value of the [latex]y[/latex]-intercept regardless of which point is selected for the calculation.

Finding the [latex]y[/latex]-intercept

- Using the
**first point**[latex]\left( {4,\,5} \right)[/latex].

- Using the
**second point**[latex]\left( {0,\,3} \right)[/latex].

Indeed, the [latex]y[/latex]-intercepts come out the same in both calculations.We can now write the linear equation in slope-intercept form.

Below is the graph of the line passing through the given two points.

**Example 11**: A line passing through the given two points [latex]\left( { – \,7,\,4} \right)[/latex] and [latex]\left( { – \,2,\,19} \right)[/latex].

Let’s solve this step by step.

**Step 1**: Assign which point is the first and second, and then label its components.

**Step 2**: Substitute the known values into the slope formula, and simplifyif necessary.

**Step 3**: Pick any of the two given points. Suppose we pick the point [latex]\left( { – \,7,\,4} \right)[/latex].That means [latex]x = – \,7[/latex] and [latex]y = 4[/latex].Using the calculated value of slope in step 2, we can now find the [latex]y[/latex]-intercept [latex]b[/latex].

**Step 4**: Putting them together in [latex]y = mx + b[/latex] form, since [latex]m = 3[/latex] and [latex]b = 25[/latex],we have the slope-intercept form of the line as

**Step 5**:Using a graphing utility, show that the solved linear equation in slope-intercept form passes through the two points.

**Example 12**: A line passing through the given two points [latex]\left( { – \,6,\, – \,3} \right)[/latex] and [latex]\left( { – \,7,\, – 1} \right)[/latex].

- Find the slope

- Pick any of the two given points. Suppose, we chose the second point which is

Substitute known values in the slope-intercept form [latex]y = mx + b[/latex] to solve for [latex]b[/latex].

- Putting them together. Since [latex]m = – \,2[/latex] and [latex]b = – \,15[/latex],the slope-intercept form of the line is

- This is the graph of the line showing that it passes both ofthe two points.

**Example 13**: A line passing through the given two points [latex]\left( {5,\, – \,2} \right)[/latex] and [latex]\left( { – \,2,\,5} \right)[/latex].

- Determine the slope from the given two points

- Pick any of the two given points. Let’s say we chose the first one, [latex]\left( {5,\, – \,2} \right)[/latex]. That means [latex]x = 5[/latex], and [latex]y = – \,2[/latex]. Use this information together with the value of slope to solve for the [latex]y[/latex]-intercept [latex]b[/latex].

- Now, put them together. Since [latex]m = – \,1[/latex] and [latex]b = 3[/latex], the slope-intercept form of the line is

- Using a graphing utility, show that the line passes through the two given points.

**You might also like these tutorials:**

- Types of Slopes of a Line
- Slope Formula of a Line
- Point-Slope Form of a Line